I have too much time on my hands since school is out. So decided to build a turbo kit for fun for cheap. lol
Just a though. I was thinking about build my own turbo kit from a variety of parts to decrease the cost since the cheapest used J&R kit is around 5000 bucks used.
Here my thought. Using richie PCD (370) from the head down I would cut up this ebay downpipe from the gen6 accord/CL and that would be my manifold.
So cut this mofo and use the flanges to weld onto the PCD. Will need to cut, bend, and weld the exhaust down pipe since it doesn't have a spot for the external wastegate to exit.
~179
From there the turbo would be a Borg Warner S362SX ~800
or a turbonetics T-62 ~795
intercooler would be this and you gotta play Tetris to get it all to fit. ~197
Blow off valve pipe connector thingy ~13
HKS blow off valve ~84
AEM boost controller ~320
or AEM boost controller with AFR ~470
For the turbo oil lines and what not you can go to Jegs.com or similar site to pick up the remainer.
RDX 410cc injectors ~350 bucks
Xenocron Tuning: RDX 410cc Injector Set of 6
total 2313 so far not including msc stuff like 2 step colder ark plugs, oil cooling line, hondata flashpro, oil bung for drainage, etc.
or you can say F it and get a used twin turbo set up. for around 3k and be limited to 350whp from this dude
Twin Turbo set up, Wilwood BBK, sub enclosure - Honda Accord Forum : V6 Performance Accord Forums
Just a though. I was thinking about build my own turbo kit from a variety of parts to decrease the cost since the cheapest used J&R kit is around 5000 bucks used.
Here my thought. Using richie PCD (370) from the head down I would cut up this ebay downpipe from the gen6 accord/CL and that would be my manifold.
So cut this mofo and use the flanges to weld onto the PCD. Will need to cut, bend, and weld the exhaust down pipe since it doesn't have a spot for the external wastegate to exit.
~179
From there the turbo would be a Borg Warner S362SX ~800
or a turbonetics T-62 ~795
intercooler would be this and you gotta play Tetris to get it all to fit. ~197
Blow off valve pipe connector thingy ~13
HKS blow off valve ~84
AEM boost controller ~320
or AEM boost controller with AFR ~470
For the turbo oil lines and what not you can go to Jegs.com or similar site to pick up the remainer.
RDX 410cc injectors ~350 bucks
Xenocron Tuning: RDX 410cc Injector Set of 6
total 2313 so far not including msc stuff like 2 step colder ark plugs, oil cooling line, hondata flashpro, oil bung for drainage, etc.
or you can say F it and get a used twin turbo set up. for around 3k and be limited to 350whp from this dude
Twin Turbo set up, Wilwood BBK, sub enclosure - Honda Accord Forum : V6 Performance Accord Forums