I need to replace all motor mounts and am having a bit of trouble locating the correct part numbers since Del Ray and OEM Acura Parts differ slightly. I have an '04 6MT and based on info I read here on AZ, I will need a torque dampener. Are these heat shields necessary? I saw that the the passenger side was completely torn and I can remove it by hand without any effort at all.
Motor Mount Part Numbers
Front 50830-SEP-A12 or A13
Rear 50810-SEP-A12
Side 50820-SEP-A11
Heat shields
50839-SDB-A01
50819-SDB-A01
Torque Damper
50843-SEP-A00
Is there not a heat shield for the front motor mount?
I have a ton of work I need done that will probably end up costing me $2,000. I'm also buying a new rack and pinion for $435. Besides this, will I need new boots if the ones I currently have are leaking? Tie rod ends? I put the car on jack stands and grabbed the front tires at 6 and 12, and 3 and 9, trying to move them, but there was no play at all so I don't think I need tie rods or new ball joints. Thanks everyone
Motor Mount Part Numbers
Front 50830-SEP-A12 or A13
Rear 50810-SEP-A12
Side 50820-SEP-A11
Heat shields
50839-SDB-A01
50819-SDB-A01
Torque Damper
50843-SEP-A00
Is there not a heat shield for the front motor mount?
I have a ton of work I need done that will probably end up costing me $2,000. I'm also buying a new rack and pinion for $435. Besides this, will I need new boots if the ones I currently have are leaking? Tie rod ends? I put the car on jack stands and grabbed the front tires at 6 and 12, and 3 and 9, trying to move them, but there was no play at all so I don't think I need tie rods or new ball joints. Thanks everyone