Hey guys, I know people have threads about the LED bulbs in their climate controls and etc.. I've seen Deathmetal's thread with the soldering in resistors and all of that sorts. I'm trying to go for the plug and play route. I've purchased these T3 Neo-wedge leds off of ebay. Links are provided below.
20x White T3 Neo Wedge Cluster Instrument Dash Climate Base LED Bulb Lights Lamp | eBay
10x Super Red 1206 SMD T3 Neo Wedge 1 LED Cluster Instrument Dash Lights New 8mm | eBay
10x T3 Yellow Neo Wedge SMD LED Light Instrument Cluster Panel Lamps Gauge Bulbs | eBay
My question is, will I be able to put these in without any issues such as shorting out or blowing a fuse? Recently I replaced the glovebox and center console light with LED's and I blew a fuse in the #4 slot fuse box slot under the hood. Or if someone can point me into the right direction, It'd be super helpful. Thank you guys
20x White T3 Neo Wedge Cluster Instrument Dash Climate Base LED Bulb Lights Lamp | eBay
10x Super Red 1206 SMD T3 Neo Wedge 1 LED Cluster Instrument Dash Lights New 8mm | eBay
10x T3 Yellow Neo Wedge SMD LED Light Instrument Cluster Panel Lamps Gauge Bulbs | eBay
My question is, will I be able to put these in without any issues such as shorting out or blowing a fuse? Recently I replaced the glovebox and center console light with LED's and I blew a fuse in the #4 slot fuse box slot under the hood. Or if someone can point me into the right direction, It'd be super helpful. Thank you guys