So im almost done and need a bit of help from someone! I plan to write up a DIY for all those interested but let me just say that it is by no means an easy task. Ive put in probably minimum of 20 hours on these. The adjustment knobs have to be custom made and welded in and the back of the housing has to be rebuilt. Almost 75% of the rear has to be rebuilt.
Basically Im at a point where I need someones help to wire it up to my car! On the jewel eyes there is one connector with 5 pins.
pin 1 - ground
pin 2 - lows
pin 3 - drl
pin 4 - highs
pin 5 - Does nothing.
I want to make a quick connect so I can connect these right into my factory harness. Whoever helps me out will get my full help with anything to do with the jewel eye retro. Once Im done 100% and they are on the car I will write the DIY detailed with all pictures of the process.