Earlier this week, I ran the 2013 "Green" DVD update on my wife's 2010 MDX. It appeared to run through ok, but now is still is a constant boot loop. The Acura logo comes up, and radio starts playing for about 7 seconds, then it reboots.
I'm able to get to the diagnostics screen, but that also reboots after the same amount of time.
So we took to the local dealership today. As they opened up the front console, they see that liquid was spilled inside (from 2 years ago), and insist that the issue is due to liquid spill. The issue I'm seeing is a direct result of running the update.
With this being a HDD based navigation, it seems either the disk is corrupted or failing. And with the above-mentioned "liquid damage", they see it as out of warranty.
I saw a similar posts regarding TSX issue like this, and the unit was sent to Alpine for work. I'm not sure if this is an option on the 2010 MDX. Hoping you all may have some advice.
Thanks,
- Rob
I'm able to get to the diagnostics screen, but that also reboots after the same amount of time.
So we took to the local dealership today. As they opened up the front console, they see that liquid was spilled inside (from 2 years ago), and insist that the issue is due to liquid spill. The issue I'm seeing is a direct result of running the update.
With this being a HDD based navigation, it seems either the disk is corrupted or failing. And with the above-mentioned "liquid damage", they see it as out of warranty.
I saw a similar posts regarding TSX issue like this, and the unit was sent to Alpine for work. I'm not sure if this is an option on the 2010 MDX. Hoping you all may have some advice.
Thanks,
- Rob